Cable TV

VeEX AT1700m_01

AT1700/AT1600

The AT1700M/AT1600E series multiplexer is a high performance cost-effective broadband RF switching solution. Combined with the AT2500 series spectrum analyzers, the AT1700M/AT1600E multiplexer is the ideal solution for headend testing and return path monitoring.

VeEX AT2500_01

AT2500-3G CaTV/Satellite/Over the Air HDTV Test Solution

Designed for digital cable TV, DOCSIS 3.1, OFDM, Satellite and over-the-air digital TV signal analysis and measurements, VeEX’s new AT2500-3G is the industry’s most complete 3 GHz advanced spectrum analyzer and multi-standards test solution.

VeEX at2500rqv+_01

AT2500RQvPlus

The AT2500RQvPlus is the industry’s most complete spectrum analyzer, combining superior QAM analysis and best-in-class analog measurement capability. The enhanced AT-Web automates both the analog and digital proof-of-performance tests, saving time, making tests consistent, and providing excellent documentation.

CaLan3010Hplus_01

CaLan 3010H+

The CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 networks. The unit consists of a high performance, 1.8 GHz Transmitter and a low noise, 204 MHz Receiver, capable of sweeping the entire Forward and Return path respectively.

CM3800-front_HR_jpg

CM3000 / CM3800

The VeEX CM3000 and CM3800,  analyse Upstream and Downstream network performance for business and bundled services and they both validate the effectiveness of DOCSIS 3.0 services in the Broadband network.

Banner-CPAT-FLEX-Overview-2018

CPAT FLEX

CPAT FLEX is an open, modular egress and ingress monitoring solution that helps broadband operators drastically improve their network operations.

 

VeEX cx10_01

CX10/CX10+

The CX10/CX10+ is a handheld Cable Length Meter that employs Fast-edge Step Time Domain Reflectometer (TDR) technology to measure the length of power and telecom cables. The unit is able to measure cable length including the distance to open or short circuit faults up to a range of 2000 meters (6000 feet).

CX100+_reclining_R_cov-off_HR

CX100+

A next generation CATV installer meter to characterize and measure Analog and Digital video signals. For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise (C/N) measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately with MER, BER and Constellation diagram results being reported.

CX110+_fornt-side_HR

CX110+

A next generation CATV installer meter to characterize and measure Analog and Digital video signals. For Analog carriers, Peak Video level, single or dual channel Audio levels and Carrier to Noise (C/N) measurements are possible on NTSC, PAL, or SECAM video formats. Digital QAM16/64/256 carriers with or without deep Interleaving are measured accurately with MER, BER and Constellation diagram results being reported.

CX120+_standing_L_cover-off_HR

CX120+

Equipped with the same base feature set as the CX100+, the CX120+ boasts the industry’s first Upstream Signal Generator with FEC capabilities as an option. This unique feature is used to characterize the HFC return path for CW, QPSK, QAM16, QAM64, or QAM128 transmission while QAM analysis is made possible when the unit is used in conjunction with the CX180+ handheld, CX180R headend monitoring solution, CX350, or CX380.

CX150+_D3_front_HR

CX150-D3+

With an embedded DOCSIS 3.0 cable modem, the CX150-D3+ supports full upstream and downstream 8×4 channel bonding, IPv6 addressing and Advanced Encryption Standard (AES) encryption used in next generation DOCSIS 3.0 networks. Cable modem emulation offered by both units provides valuable statistics pertaining to the upstream and downstream paths and related servers for video, Internet and VoIP traffic.

CX180+_reclining_R_cov-off_HR

CX180-D3+

An all-in-one, super-tech installation and maintenance tool for next generation CATV networks. The CX180-D3+ can be used at the headend for return path ingress scan and return path QAM analysis. Enhanced ingress monitoring in both the forward and reverse paths is possible across a 50dB dynamic range. Adjustable resolution bandwidths, measurement dwell times and attenuation provide spectrum analysis capabilities all optimized for CATV signal types and bandwidth.

VeEX CX180f_01

CX180F

The CX180F is a rackmount monitoring system to check the performance of analog and digital channels being transmitted downstream or toward customers across a CATV HFC network.

VeEX CX180r_01

CX180R

This rackmount headend system completes the requirement of DOCSIS 3.0 deployment where higher QAM on the return path becomes necessary and mandatory. The compact 1U rackmount chassis supports simultaneous and continuous ingress scanning of all 10 ports at a fast sweep rate of 200ms and dual ports are available for return path spectrum, QAM, MER, BER, and Constellation analysis.

VeEX CX310_01

CX310

For the next few years, Service Providers will be upgrading their HFC networks to offer ultra high-speed Broadband services utilising DOCSIS 3.1. To help overcome the technical hurdles while not straining capital budgets, VeEX introduces its new CX310, a compact, low-cost meter suitable for every installation technician.

VeEX CX350s_01

CX350s-D3.1

The VePAL CX350s-D3.1 is a portable, all-in-one test solution for legacy analog and digital Cable TV networks, supporting SLM, DOCSIS 3.0/3.1, Ethernet, and T1 test capabilities.