Ethernet

TelecomTest Solutions are an industry leading supplier of ethernet test equipment to be used in both lab and field based environments.

  • Solutions for 2.5GE, 5GE, 25GE, 50GE and 400GE Ethernet interfaces
  • Layer 2-3 performance testing including RFC2544, Y.1564, RFC3918 and RFC2889
  • Layer 4-7 test platforms for end-to-end emulation of media-rich traffic network conditions
  • 10/100/1000BaseT testing
  • OTN, SDH, SONET, PDH, DSn and Mobile Backhaul testing
  • 100G Test Solutions to Support CFP4, CFP2, CFP, QSFP28 and QSFP+ pluggable transceivers
  • Network latency simulators
  • IPv4 and IPv6 traffic generators
lldp-traces-gui

802.3at LLDP

With the 802.3at standard, PoE has moved in the direction of bypassing layer 1 PD classification in favour of a MAC (or Link) Layer PD classification that offers very high power distribution granularity and enables dynamic negotiation of power levels between PSE and PD.

bgp_bds_bgp-wan-delay-emulator

BGP-EDS

The BGP WAN Delay Emulator with integrated Quagga Router. The Border Gateway Protocol or BGP is at the core of the modern Internet. Large corporate and government enterprise networks are increasing their use of BGP to interconnect different administrative and country specific regions. This geographic span adds further to the complexity of a BGP network when calculating and planning for network latency. Network design engineers need a reliable and cost effective means to test the routers’ ability to handle BGP transactions accurately while simulating network latency with their applications.

VeEX DI1000_01

DI-1000

Digital Fibre Inspection Microscope

The ergonomically designed DI-1000 connects directly to VeEX test sets through its USB 2.0 port. The DI-1000 features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.

dmm-4

DMM-4, 4-Port RS-232 Port Sharing Device

eds10gb

EDS-10G

The EDS-10/40G, from East Coast Datacom,  is a WAN Emulator allowing users to test/stage critical network equipment by  altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000,  10GbE and 40GbE Ethernet. Excellent for network impairment testing.

eds1g

EDS-1G

The EDS-1G, from East Coast Datacom, is a WAN Emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000 copper or fiber Ethernet. The product is an excellent choice for network impairment testing.

xenaappliance-trans

Layer 2-7 Gig-Testing

The Xena Layer 2-7 Gig-Testing platform is a compact all in one chassis which supports 10GE and 1GE L4-7 interfaces, and can be equipped with 10GE or 1GE L2-3 test modules, making it capable of both L2-3 and L4-7 testing.

MC100_01_LR

MC100/MC1000

The MC100 and MC1000 are highly compact media converter accessories for use with the MX/TX Ethernet product series or for standalone applications.

VeEX MLX100_01

MLX100

VeEX™ MLX100 Metro Loopback Expert is an intelligent Ethernet loopback device developed as a perfect companion to the MX100+, MX120+, MX300, and TX300 products.

product_header_mpa

MPA – Multi Protocol Analyser

One single platform for physical layer and multi-protocol testing requirements which will grow as needs change and expand, allowing modules to easily be added on-site and new capabilities to be downloaded. With all ports configured independently and operated simultaneously, the MPA significantly reduces the amount of testing equipment, required footprint and test time. SLAs can be remotely managed, eliminating truck rolls.

VeEX MTTPLUS_01

MTTplus

Modular Test Platform

Building on the legacy of the legendary MTT, the MTTplus platform provides a compact, powerful and cost-effective modular test toolkit for today’s wide range of evolving test needs. The modern and flexible MTTplus test platform offers a growing range of test modules covering legacy and modern Access (copper and fiber), FTTx, Metro, Carrier Ethernet and Transport technologies.

multi service test set

MTX150 Multi-service Installation & Maintenance Test Set

MTX150  Multi-service Installation & Maintenance Test Set

The MTX150 is a fully integrated and self-contained multi-service test solution for OTN, SDH, SONET, PDH, DSn, Ethernet, SyncE, Mobile Backhaul, and Fibre Channel (SAN).

VeEX MX100E+_01

MX100e+

The VeEX MX100e+ is a full-featured lightweight Ethernet test solution. The MX100e+ supports 10/10/1000Base-T, 1000Base-X, and 100Base-FX interfaces. Additionally it supports RFC2544, Multiple Streams, Q-in-Q, MAC and VLAN flooding. With its comprehensive array of test functionalities, including new solutions for applications such as ITU Y.1564 and Ethernet OAM testing, the MX100e+ is ideal for field technicians installing, commissioning, and maintaining Carrier Ethernet and Mobile Backhaul networks.

VeEX MX120E+_01

MX120e+

Fitted with two 10/100/1000Base-T and two 100Base-FX/1000Base-X ports, the VeEX MX120e+ doubles the test capabilities and features available on the MX100e+. Additional features include full Ethernet testing and bi-directional in-service pass through monitoring capabilities. With dual port testing, an Ethernet test application can be active on a test port, while the other port can be used for Smart Loopback. The price/performance ratio of the MX120e+ is unrivalled in the industry.

acm256

MyConnection Server – Visualware

MyConnection Server

New in MCS v10! MyConnection Independent Certification Cloud (MICC)

The Game-Changer to quickly identify and poor quality connections!

pda-300-face-left-off

PDA-300

The PDA-300 Powered Device Analyzer is a single-box comprehensive solution for testing IEEE 802.3at PoE Powered Devices (PD’s). It offers one-button, fully automated test sequences and limit processing for critical Powered Device operating parameters. With measurements performed at the Powered Device network interface, many parameters critical to IEEE 802.3at interoperation can be efficiently compared to specification requirements thus fully avoiding the need for extensive interoperability testing with IEEE 802.3at PSE’s and network connections.