RTU-600x Advanced 100G Ethernet Test Unit
RTU-600x Advanced 100G Test Module: Compact Centralised Ethernet and Fibre Channel Test Solution
RTU-600x is available stand-alone or combined with other modules as a hardware option for RTU-300+ standalone platform. Offers full-featured centralised test solution for Ethernet links and services testing from 10 Mbps to 100 Gbps. Low-cost factory-installed hardware option provides flexibility for modern Core, Metro, NOC, PoP, mobile backhaul, and datacentre applications. Complete Ethernet test set with latest pluggable physical interfaces and perfect complement to RTU-300+ platform extending testing range to 100 Gbps. Compatible with the companion RTU-340 option, it offers a complete 64k to 100G test solution in a compact 1RU 19-inch rack package with intuitive graphical interface and powerful test functions.
- 10 Mbps to 100 Gbps Ethernet testing in single module
- QSFP28/QSFP+, SFP28/SFP+, and RJ45 test ports for flexibility
- Supports IEEE 802.3bj Clause 91 RS-FEC for signal integrity testing
- Optical Lane BERT and CAUI-4/XLAUI Lane BERT capabilities
- PCS Layer Testing with skew generation and monitoring
- Multi-stream testing up to 32 independent streams for complex traffic
- RFC2544 and Y.1564 V-SAM testing for service compliance
- Fibre Channel 1G to 32G Layer FC-1 and FC-2 throughput testing
- OTU4 testing with bulk and 100GE Ethernet payloads
- Line rate packet capture with Wireshark decode
- Can be combined with RTU-340 module for extended capabilities
- Transmit frequency offset to stress network up to ±150 ppm
- Optical Lane BERT and CAUI-4/XLAUI Lane BERT testing
- FEC Layer Testing with skew generation per lane pair (0 to 160,000 bits)
- PCS Layer Testing with configurable skew and alarm thresholds
- Service Disruption Measurements with concurrent monitoring across multiple layers
- Throughput, latency, jitter, frame loss, and back-to-back measurements per RFC2544
- Multi-stream testing with up to 32 configurable independent streams
- IPv4 and IPv6 traffic generation with VLAN stacking and MPLS tag support
- MAC flooding generates test frames with up to 4,096 incrementing MAC addresses
- Smart Loop mode for Layer 2 and Layer 3 with configurable parameters
- Configurable packet capture filters with integrated Wireshark decode
- RFC6349 V-PERF TCP/UDP test for application-layer performance testing
- FTP and HTTP throughput testing with V-TEST and V-FTP features
- OTN Ethernet over OTN (EoOTN) testing with overhead manipulation
- Tandem Connection Monitoring (TCM) for multi-layer optical testing
- Test Ports: 1x QSFP28/QSFP+, 1x SFP28/SFP+, 1x RJ45 per module
- Maximum Data Rate: 100 Gbps per port
- Supported Applications: 100GE, 40GE, 25GE, 10GE, 100/1000BASE-X, 10/100/1000BASE-T, 32G FC, OTU4/OTU3, OTU2/OTU1
- Ethernet Testing: 10 Mbps to 100 Gbps with full frame handling
- Frame Sizes: 64 to 1,518 bytes standard, jumbo frames up to 16,000 bytes
- FEC Lane Skew: Generation 0 to 160,000 bits, RX tolerance up to 4,000 bits
- PCS Lane Skew: Generation 0 to 16,000 bits, RX tolerance up to 4,000 bits
- Multi-Stream Support: Up to 32 streams on 40GE/100GE, 10 streams on 10GE, 8 streams on 1GE
- RFC2544 Compliance: Throughput, Latency, Jitter, Frame Loss, Back-to-Back tests
- Fibre Channel Support: 1G to 32G with FC-1 and FC-2 layer testing
- OTN Support: OTU4/OTU3/OTU2/OTU1 testing with EoOTN capabilities
- Transmit Clock Source: Internal (Quartz ±3.5 ppm), Recovered, or External
- Frequency Offset: ±150 ppm in 0.1 ppm steps
- OTN Mappings: AMP, BMP, and GMP procedures supported
- TCP/UDP Testing: RFC6349 V-PERF with stateful testing at line rate
- FTP Testing: V-FTP with upload/download file testing capability
- HTTP Testing: V-TEST with Ookla Speedtest compatibility
- Dimensions: 4.4 x 48.26 x 30 cm (1.75 x 19 x 11.8 inches), 1U 19-inch rack
- Weight: 3.51 kg (7.74 lb) with single module, 3.85 kg (8.49 lb) with dual modules
- Power Consumption: Chassis 10W, RTU-600x module not specified (varies by operations)
- Operating Temperature: 0°C to 45°C (32°F to 113°F)
- Storage Temperature: -20°C to 70°C (-4°F to 158°F)
- Humidity: 5% to 90% relative humidity non-condensing
- Power Input: 100 to 240 VAC 50/60 Hz 2.4A or 15V DC 5.33A
- Certifications: RoHS compliant and Lead Free per Directive 2002/95/EC
- Management: Web-based interface, VNC client, SCPI remote control support
- Results Export: PDF, CSV, TXT formats with advanced report generation via ReVeal RXTS
Advanced Test, Measurement & Network Assurance Solutions