Applied Instruments XR-3 Signal Level Meter From satellite dish alignment, to UHF off-air antenna pointing, to cable TV MER measurements, the XR-3 is the meter for you!
AT1700/AT1600 RF Switch Multiplexer is a high performance cost-effective broadband RF switching solution. Combined with the AT2500 series spectrum analyzers, the AT1700M/AT1600E multiplexer is the ideal solution for headend testing and return path monitoring.
AT2500-3G CaTV Over the Air HDTV Test Solution Designed for digital cable TV, DOCSIS 3.1, OFDM, Satellite and over the air digital TV signal analysis and measurements
CaLan 3010H+ Sweep System is designed for prequalification, installation, and maintenance of DOCSIS 3.1 networks.
CM3000 / CM3800 , analyse Upstream and Downstream network performance of DOCSIS 3.0 services in the Broadband network.
CPAT FLEX egress and ingress monitoring solution is an open, modular egress and ingress monitoring solution that helps broadband operators drastically improve their network operations.
CX180F CATV Forward Path Monitoring System is a rackmount monitoring system to check the performance of analog and digital channels being transmitted downstream or toward customers across a CATV HFC network.
CX180R Return Path Monitoring System , This rackmount headend system completes the requirement of DOCSIS 3.0 deployment where higher QAM on the return path becomes necessary and mandatory.
CX310 DOCSIS 3.1 Installation Tool Service Providers will be upgrading their HFC networks to offer ultra high speed Broadband services utilising DOCSIS 3.1.
CX380X Return and Forward Path monitoring ,The CX380X Advanced Test Probe for Return and Forward Path monitoring, features advanced Spectrum Analysis, QAM Health, and Burst QAM Demodulator capabilities.
DI-1000 Digital Fiber Inspection Microscope features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.
FX180 – Micro Optical Spectrum Analyzer Available in two test configurations, CWDM or DWDM C-band, the FX180 measures key parameters such as wavelength, channel power, drift and OSNR.
The MTTplus-410+ Fiber Optics test module for the VeEX® MTTplus platform now has up to 500,000 data points with 3 cm resolution. The MTTplus-410+ supports a full range of test functions including OTDR, OPM, Light Source and VFL.
Noise Generators and NPR Tests to assist organisation in the field and in the lab to verify quality of transmission lines and circuits delivering an agreed SLA.
TX300s-OTDR Module ,The Fiber Optics test option for the VeEX® VePAL TX300s adds a full range of Optical test features that support OTDR, OPM, Light Source and VFL
Call Us
1300 468 469
