TelecomTest Solutions are an industry leading supplier of ethernet test equipment to be used in both lab and field based environments.

  • Solutions for 2.5GE, 5GE, 25GE, 50GE and 400GE Ethernet interfaces
  • Layer 2-3 performance testing including RFC2544, Y.1564, RFC3918 and RFC2889
  • Layer 4-7 test platforms for end-to-end emulation of media-rich traffic network conditions
  • 10/100/1000BaseT testing
  • OTN, SDH, SONET, PDH, DSn and Mobile Backhaul testing
  • 100G Test Solutions to Support CFP4, CFP2, CFP, QSFP28 and QSFP+ pluggable transceivers
  • Network latency simulators
  • IPv4 and IPv6 traffic generators
100G

100G Portable Testers

Choose from 3 different portable models of transmission testers that can test up to 100G.

602B Powered Device Analyser

602B Powered Device Analyser

602B Powered Device Analyser from Sifos Technologies is a single-box comprehensive solution for testing IEEE 802.3at PoE Powered Devices (PD’s).

BGP-WAN-Delay-Emulator

BGP Network Emulator for 10G or 1G

The BGP-EDS network emulator is a product used to apply traffic rules on packets fl owing out of the egress port for the intended packets matching source address and destination address. Dynamic Routing protocols like BGP are used for the route and can be applied to an Interior Gateway Network as well as an Exterior Gateway Network.

bgp_bds_bgp-wan-delay-emulator

BGP-EDS

The BGP WAN Delay Emulator with integrated Quagga Router. The Border Gateway Protocol or BGP is at the core of the modern Internet.

CV1002

Cable Certifier TestPro CV100 for Fiber and LAN CAT5~8

Certify your cables to ISO/IEC 14763-3 and AS/NZS 3080:2003 through hot swappable test adapters.

NEE

CHIMERA- Network Impairment Emulator

CHIMERA- Network Impairment Emulator is a network impairment emulator that makes it easy to introduce consistent, accurate, and repeatable impairments. 

DI-1000 Digital Fiber Inspection Microscope

DI-1000 Digital Fiber Inspection Microscope

DI-1000 Digital Fiber Inspection Microscope features an easy single-finger focusing knob, comprehensive list of tips and digital image sensor and optics with detectable resolution to 0.5 μm.

dmm-4

DMM-4, 4-Port RS-232 Port Sharing Device

The Digital Mixing Module DMM-4 is a digital sharing device or network expansion device for modem sharing or port sharing applications in polled, contention, SCADA and broadcast environments.

DMM-4DC, DC Powered Port Port Sharing Device

DMM-4DC, DC Powered Port Port Sharing Device

The RS-232 Digital Mixing Module (DMM-4DC) or port sharing device is a network expansion device for modem sharing or port sharing applications in polled or contention environments.

eds10gb

EDS-10G WAN Latency Emulator

The EDS-10/40G is a WAN Emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss.

EDS-1G WAN Emulator

EDS-1G WAN Emulator

EDS-1G WAN Emulator, from East Coast Datacom, is a WAN Emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss.

FX87 - DWDM Tunable Laser Source (TLS)

FX87 – DWDM Tunable Laser Source (TLS)

FX87 – DWDM Tunable Laser Source (TLS) can be tuned to any G.694.1 channel on the 50 GHz frequency grid over the C-band spectrum. 

KE401

KE401 IT kit

The cable locator kits consist of EASYTEST and PROBE and enable every technician to find any type of cable, wire and wire pair in a very short time without contact without time-consuming stripping work

KE501

KE501 electrical kit

The cable locator kits consist of EASYTEST and PROBE and enable every technician to find any type of cable, wire and wire pair in a very short time without contact without time-consuming stripping work.

KE701 Telco

KE701 Telco Kit

The cable locator kits consist of EASYTEST and PROBE and enable every technician to find any type of cable, wire and wire pair in a very short time without contact without time-consuming stripping work. 

K1

KE7100 LANcheck LAN Tester

Wiremap, length, TDR, continuity, open, short, split pair, cable length, distance to the fault, up to 32 individual remote units, checks availability of Power over Ethernet (PoE and PoE+) and determines the available power.