F4-10G-BP-Front

4x10G Bypass TAP F4-10G-BP

The 4x10G Bypass TAP allows the monitoring of up to 4 in-line 10G links. This TAP allows Network Engineers to manually bypass the in-line tool, to keep the network fully operational during maintenance and troubleshooting.

Placed in front of in-line tools, it represents a fail-safe solution that continuously checks their availability. Therefore, if the tools’ availability is compromised in any way, the TAP automatically switches to a bypass mode, maintaining the network link up until the issue is fixed.

Fail-Safe Bypass & Heartbeat

Designed to support active in-line network security and performance tools, our Bypass TAPs make sure these devices don’t become a single point of failure in your network. By sending heartbeat packets, they can accurately track if the connected device is operational.

In case the in-line device fails, either due to a hardware malfunction, power loss, or software problem, the fail-safe protection of the Bypass TAP will keep the critical link up.

Fail-Safe Bypass & Heartbeat Illustration
  • Remote access and management with GUI/CLI
  • Bidirectional Heartbeat (ping signal to and from the monitored appliance)
  • Customizable heartbeat packets, including IPX, ICMP request/reply, LCP request/reply and TCP-SYN

  • Link Failure Propagation (LFP)
  • Heartbeat control
  • 4x10G operation
  • High reliability design, no point of failure
Connectors
2 x MPO (MM&SM)
2 x QSFP+
2 x RJ45 8 pins
2 x 12 VDC
Speed
4 x 10 Gbps
Transceivers
PT-40G-SR4-85 PT-40G-PLR4-31
SFP Module SFP Module
40GBASE-SR4
QSFP+ 850NM 150M (MTP/MPO)
     40GBASE-PLR4
      QSFP+ 1310NM 10KM (MTP/MPO)