G.hn Power Line Communication Testing Solutions
G.hn Power Line Communication Testing Solutions ,The Model GHN-SP-UPLC Universal Power Line Communications Splitter device is used to provide a controlled AC port to the PLC modem, separate and isolate the high-frequency PLC signal from AC power, and make it accessible on three BNC ports labeled L1, L2 and L3 with a controlled impedance. Having the PLC signal on BNC ports allows using standard instruments and accessories to perform measurements and build controlled topologies. Capable of performing Dynamic PSD Test and Cognitive Frequency Exclusion test (Dynamic Notching) per EN 50561-1 using Model 501 and 501-Probe-Coax.
| GHN-SP-UPLC Specifications | |
| Electrical Safety | Complies with EN 61010-1 : EN 60950-1 |
| Insertion Loss (Single Line) | EUT to BNC OUT (L1-L3): 0.35dB@ 80 MHz, 0.45dB@ 100 MHz |
| Differential Line Impedance | 100 ohm +/- 10% (1MHz to 100 MHz) |
| Continuous Operating Voltage | 90 to 240VAC, 50 Hz/60 Hz |
| Outputs: L1, L2, L3 | BNC-female Connector, 50 Ω Impedance, 1MHz to 100MHz |
The Model GHN-SP-SPLCOMB-UPLC-3 3-Channel Splitter/Combiner is a symmetrical power splitter and combiner where all the ports have 6 dB attenuation to each other.
This product provides one set of three BNC ports on one side and two sets on either side. The spacing between connectors is the same as in the GHN-SP-UPLC Universal Power Line Communications Splitter, allowing the device to be connected directly using male-male BNC barrels to reduce the number of cables. (Unused ports of the 3-Channel Power Splitter/Combiner must be terminated with 50Ω.)
The Model GHN-AT-PROG-UPLC-3 3-Channel Programmable Attenuator is used along with the GHN-SP-UPLC in the PSD Measurement test set up. Offers an attenuation range of 1 to 127 dB in 1-dB increments.
| GHN-AT-PROG-UPLC-3 Specifications | |
| Number of Channels | 3 |
| Attenuation Range | 1 to 127 dB in 1-dB increments |
| Frequency Response Uniform | ± 0.5 dB from 1 MHz to 127 MHz |
| Impedance | 50 ohm |
| Connectors | SMA Connector Jack, Female Socket 50 Ohm |
| Interface | USB |
The GHN-ADP-CH_BR is a Schuko power adaptor for Switzerland and Brazil. It is approved for use with the Model GHN-SP-UPLC Universal Power Line Communications Splitter.
The GHN-ADP-IT_RCH is a Schuko power adaptor for Italy and Chili. It is approved for use with the Model GHN-SP-UPLC Universal Power Line Communications Splitter.