| Features | Flashlight function xDSL signal filter LED (ADSL – ADSL 2+, VDSL2 bis 17a / VDSL35b, G.fast) |
| Search distance | To cable max. 60 cm, search depth under plaster max. 15 cm |
| Dimensions | 220 x 40/35 x 25 mm |
| Weight | 90 g without battery |
| Additional hardware features | Test probe made of non-conductive carbon fibre reinforced plastic 3.5 mm headphone jack Gold-plated contacts Detached battery compartment |
| Power supply | 9 V block battery |
| Casing | Sturdy, impact-resistant and weather-resistant ABS-case with membrane keys |
KE3100 xDSL Detection Kit
KE3100 xDSL Detection Kit enables technicians to detect both availability and activity of classic and IP-based DSL services. can activate the inactive DSLAM / ISAM at the remote end of a wired line to indicate the availability of a DSL service and the Annex variant via LED: Annex A / M (DSL via POTS), Annex B (DSL via ISDN) or Annex J (All-IP). All current xDSL services according to ITU-T G.441 are supported, for example ADSL or VDSL2 as well as the new SuperVectoring (VDSL 35b) and G.fast technology.
With the unique KE420 xDSL PROBE, wire pairs which carry active xDSL signals can be detected contactlessly. The active services are neither disturbed nor do they lose their connection. This way, the lines carrying an active xDSL signal can be easily determined in the Central Office (CO), at the Street Cabinet, at the house transfer point or in the building. Two LEDs indicate the activity from ADSL to ADSL2+, VDSL2 to Bandplan 17 and VDSL35b / G.fast. The brightness of the xDSL LED additionally indicates the signal strength.
| Flexible test cord | 25 cm |
| Test cord connections | 2x banana with crocodile clips 1x RJ11 plug with TAE adapter 1x RJ45 plug |
| Additional test ports | 1x 2,5 mm universal optical fibre ferrule (KE895) |
| Features | Continuity test LED + tone DSL availability test for services according to ITU-T G.441 such as ADSL – ADSL2+, SHDSL, VDSL2, VDSL 35b, G.fast Resistance test by changing the tone frequency Low battery indication by flashing LED Auto power off 45 / 90 min. / never (in toner mode) Device switch-on indicator with LED Data port test via Link-Blink function Visible laser light source (VFL) (KE895) |
| Frequencies Copper (<±1 %) | Solid: 1 kHz, 1,9 kHz, 577 Hz |
| Frequencies Fibre | 270, 1000 Hz moduliert + pulse (KE895) |
| Ranger Copper | Max. cable length up to 15 km without load, up to 0.4 mm Ø |
| Range Fibre | Max. cable length up to 10 km (KE895) |
| Transmitting power (9 V block battery) | 9.0 VSS without load / ~ 12 VSS with loaded battery +5 dBm at 600 Ohm for fundamental 1 kHz 0 dBm at 100 Ohm for fundamental 1 kHz -5 dBm at 50 Ohm for fundamental 1 kHz |
| Overvoltage protection | Up to 500 V DC / 350 V AC in all modes except CONT and ETH for banana plugs / Pin 4 + 5 on RJ45 |
| Dimensions | 150 x 65 x 26 mm |
| Weight | 220 g without battery |
| Case | Solid, shock-resistant and weather-resistant ABS-case Detached battery compartment Captive Screw |