KE401
KE401
KE401-2

KE401 IT kit

The cable locator kits consist of EASYTEST and PROBE and enable every technician to find any type of cable, wire and wire pair in a very short time without contact without time-consuming stripping work. Errors such as swaps, overdrafts, interruptions and other faults in the cable are detected. The cable finder can be used for all types of cables such as power cables, telephone cables, bell lines, data cables of all classes, coax cables and other applications.

KE401 IT Kit:

  • For IT & telephone cabling and wire pair identification
  • RJ11 / RJ45 plugs & alligator clips
  • Data port test with port finder function
  • ISDN signal identification with optional probe
  • 120 V AC surge protection
ET400 IT kit search signal transmitter
Flexible test cord 25 cm
Test cord connection 2x alligator clips
1x RJ11 plug
1x RJ45 plug
Functions Continuity test with LED
resistance test by changing frequency
Low batt display by flashing LED
Automatic switch-off after 45 min.
Deactivation of switch-off
Device switch -on control with LED
display ALTERNATING FREQ. with blink. LED
display SOLID Freq. with upright LED
data port test through port finder function
Search frequencies 6 frequencies selectable
SOLID: 1000, 2600, 577.5 Hz and ALT: 1000/800, 2600/1900, 577.5 Hz pulsating
Accuracy <± 1% (quartz)
Range Maximum cable length up to 16 km without load
Sound on short-circuited wire up to 250 m
Transmission power High transmission power with 9.2 V battery
9.0 V SS without load
10 dBm at 600 ohms
9 dBm at 100 ohms
7.5 dBm at 50 ohms
Overvoltage protection 120 V AC / DC
Dimensions / weight 68 x 96 x 25 mm / 150 g without battery
Additional features Strain relief of the test leads
gold plated contacts
Separate battery compartment
KE301 – KE801 General Specifications
Power supply 9 V battery
> 100 hours of operation
casing Stable, impact-resistant and weather-resistant ABS housing with silicone actuation buttons
P410 sample
Functions 1 kHz filter signal LED
flashlight function
ISDN filter signal LED
Range Search distance to the cable 100 cm
Dimensions / weight 220 x 40/34 x 25 mm / 80 g without battery
Additional features Non-conductive test probe made of carbon fiber reinforced plastic.
3.5 mm headphone
socket. Gold-plated contacts.
Separate battery compartment