k22
k22
K222

KE7200 Ethernet Performance Tester

The KE7200 Ethernet Performance Tester is an easy-to-use and inexpensive active network tester, tailored to the daily needs of the installing technician.

KE7200 recognizes all important wiring errors and shows them clearly on its large graphic display. This innovative tester can be used for commissioning tests as well as for troubleshooting in the active network.

  • Detection and localization of cable faults from 1 wire pair
  • Storage and protocol creation
  • Integrated, configurable cable database from 1 pair of telephones
  • Detection of branches in the telecommunications network (bridge taps) – optional
  • TDR cable length measurement up to 200 m
  • Power over Ethernet load test (IEEE802.3af / at / bt)
  • Detection of 10/100/1000 MBit connections
  • Network scan / ping stress test
  • Port finder function and tone transmission mode
  • Overvoltage protection up to 100 V.

overview

The KE7200 Ethernet Performance Tester network tester with memory function is the ideal helper for commissioning tests, troubleshooting and documentation in data and telecommunications networks – with an outstanding price / performance ratio. Versatile functions, the large graphic display and intuitive operation enable the user to work efficiently. Long battery life and the robust housing are the perfect prerequisites for daily use.

The KE7200 checks wires and wire pairs of the cable routes for continuity, interruption, short circuit, swap and overdrawing (split pair) and at the same time determines the cable length and distance to the fault in the event of short circuit and interruption. With the cable database that can be configured internally by the user, unknown cable and wiring schemes are a thing of the past. The KE7200 can manage up to 32 individual remote units at the same time.

The device checks connections for the availability of Power over Ethernet (PoE, PoE + and PoE ++) and uses a load test to determine the available power.

Active network tests, such as the detection of speeds of up to 1 gigabit, a listing of the existing network participants with name, IP and MAC address, and the configurable ping stress test with detailed statistics, provide information about the network and any faulty components.

To assign active data ports, the link LED on the switch is activated with the help of the port finder function and the integrated tone transmission mode enables cable searches with unconnected connections using the optional PROBE310.

The optional software for detecting branches in the in-house telecommunication cabling is ideal for tests in the telecommunications network.

KE7010 remote unit
Performance characteristics ID programmable 01 – 32
LED for good / bad display
casing Stable, impact-resistant, weather-resistant ABS housing
Dimensions 61 x 41 x 26 mm
Weight 30 g
KE7200
Wiring test copper Check of data line assignment with PIN and pair assignment – Wiremap
detection of split pair (overdraft) from 2 m
16 connection versions predefined – Easy creation of your own definitions from 2 wires
16 cable types predefined with VF, creation of your own cable types possible
Clear graphic display for quick error identification
Measurement of the individual Wire lengths with TDR and display in m or ft. From 2 m to 150 m
Power over Ethernet test Activation of the PoE / PoE + / PoE ++ functions
Measurement of the voltage in V and determination of the power in watts according to IEEE802.3af / at
Port identification Link-blink function with NLP
search tone for cable search with capacitive probe (optional PROBE310)
4 search frequencies selectable
IP network test Connection via DHCP or static IP
Detection of the network speed 10/100/1000 Mbit
Own IP and MAC address adjustable
List of active participants with name, IP and MAC address
Ping test to selected addresses, ping frame adjustable from 32 – 1024 bytes
Display of the Ping results for received / lost and times min / max / average
Constant ping mode to generate traffic
Bridge Tap & Junction (Option) Exact localization of branch lines / branches in telecommunication cabling
Overvoltage protection Up to 100 volts
casing Stable, impact-resistant, weather-resistant ABS housing
battery 4x 1.5 V (AA) alkaline batteries, runtime up to 40 hours, battery operation possible
Dimensions 195 x 100/78 x 45 mm
Weight 380 g without battery
Menu languages German English
Operating environment Working temperature 0 ° – + 50 ° C
Storage temperature -25 ° – + 75 ° C
Humidity 90%, non-condensing