LT2000 – Line Tester
| ATEN has developed this easy to operate and cost effective instrument for field operation, to verify the quality of copper pair for analog and digital transmission up to 2MHz.
The LT2000 can perform the following measurements: |
NOISE – LEVEL – ATTENUATION – CROSSTALK – RETURN LOSS
for various transmission systems:
-Base band ISDN T1 E1 HDSL ADSL
| NOISE & LEVEL METER With one LT2000 at one side of the line. |
| ATTENUATION METER With two LT2000 at the opposite sides of the line. |
| CROSSTALK METER NEXT: with one LT2000 at one side of the line; FEXT: with two LT2000 at the opposite sides of the line. |
| RETURN LOSS METER With one LT2000, to measure the level of echo-signal caused from the impedance mismatching of the line. |
| LONGITUDINAL BALANCE METER With one LT2000 and a special adapter, to measure the balance attenuation of the line referred to ground or other conductor. |
| SPECIAL FEATURES Automatic measurement in sweep mode: RMS Noise Level – readout on programmed wide-band; Return Loss – frequency and level readout of min. and max. echo level; Near Cross-Talk – frequency and level readout of min. and max. cross level. |
| Intercomm facility between a local and a remote user, using the line under test. |