Model 458-LM-A1-30-TR114

Local Loop Simulator

Model 458-LM-A1-30-TR114 Local Loop Simulator for TR-114 Including Bridged Tap

The Model 458-LM-A1-30-TR114 Local Loop Simulator for TR-114 is the ideal solution for simulating test loops as defined in TR-114 and includes a Bridged Tap. In addition, it is also suitable for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing of straight loops out to 24,000 feet in very small increments.

This versatile local loop simulator is plugged into our Model 458-3SLx (3-Slot) or 458-CC-16 (16 Slot) chassis where settings are controlled by a convenient keypad located on the front, RS-232, Ethernet or IEEE-488(GPIB). The modular design of Telebyte’s products allows the 458-LM-A1-30-TR114 to be combined with other line modules for a wide variety of test configurations.

 

Main Features

The Model 458-LM-A1-30-TR114 from Telebyte Broadband

  • Simulates 26 & 24 AWG PIC as specified in ANSI T1.417
  • Bandwidth DC to 30 MHz
  • Solution for TR-114 test loop simulation, including bridged tap
  • Also suitable for ADSL, ADSL2, ADSL2+, & VDSL2 chip/modem/DSLAM testing
  • 26 AWG loop lengths programmable from 0 to 24,000 ft in 25-ft increments
  • Plugs into our Model 458-CC-16 (16-slot) or 458-3SLx (3-Slot) chassis
  • Loop Lengths can be controlled manually via front panel of chassis, or remotely via RS-232, Ethernet or IEEE-488 (GPIB)

 

Product Specifications

Product Specifications
Simulation Accurately simulates attenuation and impedance
Full bidirectional operation at all specified frequencies
24/26 AWG PIC as specified in ANSI T1.417
Bandwidth DC to 30 MHz.
Attenuation Accuracy
(when source and load
impedances are 100 ohms)
MAE < 1 dB 20 kHz to 30 MHz
Maximum Attenuation > 90 dB
Impedance Accuracy Typically +/- 10% 20 kHz to 30 MHz
Maximum Voltage Tip – Ring 200 V
Maximum Current 130 mA
Connectors 2 RJ-45’s on front

Specifications are subject to change without notice. Made in USA