Model 458-LM-E1-30-04+

Model 458-LM-E1-30-04+

Model 458-LM-E1-30-04+ Multi-Standard Local Loop Simulator is the ideal solution for ADSL, ADSL2, ADSL2+, G.shdsl and VDSL2 chip/modem/DSLAM testing. This single-pair loop simulator can simulate either 0.4mm PE for ADSL, ADSL2, ADSL2+ and VDSL2 or PE04 for G.shdsl. Optional noise sources may be ordered that add in AWGN on the CO and CPE side that may be independently controlled.

This versatile local loop simulator is plugged into our Model 458-3SLB (3-Slot) or 458-CC-16 (16-Slot) chassis where settings are controlled by a convenient keypad located on the front, RS-232, Ethernet or IEEE-488(GPIB). In addition, the user-friendly 458 Universal GUI may be used for remote control. The modular design of Telebyte’s products allows the 458-LM-E1-30-04+ to be combined with other line modules for a wide variety of test configurations.

 

Main Features

The Model 458-LM-E1-30-04+ from Telebyte Broadband

  • Simulates one loop of:
    0.4mm PE as specified in ETSI TS 101 388; OR
    PE04 as specified in G.991.2 Annex B (G.shdsl) or ETSI TS 101 524
  • Line lengths: 0 to 9,000 m/10-m
  • Bandwidth DC to 30 MHz
  • Solution for ADSL, ADSL2, ADSL2+, G.shdsl & VDSL2 chip/modem/DSLAM testing
  • Plugs into our Model 458-CC (16-slot) or 458-3SLB (3-Slot) chassis
  • Loop Lengths and AWGN levels controlled manually via front panel of
    chassis, or remotely via RS-232, Ethernet, IEEE-488 (GPIB), or 458
    Universal GUI

 

Product Specifications

Model 458-LM-E1-30-04+ Multi-Standard Local Loop Simulator with Optional AWGN Generator
Simulation Accurately simulates attenuation and impedance
Full bidirectional operation at all specified frequencies
0.4mm PE as specified in ETSI TS 101 388 or PE04 as
specified in G.991.2 Annex B (G.shdsl) and ETSI TS 101 524
Optional White Noise (AWGN) Generator
Bandwidth 0.4mm PE: DC to 30 MHz | PE04: 5 KHz to 2 MHz.
Attenuation Accuracy 0.4mm PE: MAE < 1 dB 20 kHz to 30 MHz (when source and load
impedances are 100 ohms)
PE04: MAE < 1 dB 5 KHz to 2 MHz (when source
and load impedances are 135 ohms)
Maximum Attenuation > 90 dB
Impedance Accuracy Typically +/- 10%
Maximum Voltage Tip ?Ring 200 V
Maximum Current 130 mA
Connectors 2 RJ-45′ on front
Optional White Noise (AWGN)
Generator (factory-installed
sub-module)		 -90 dBm/Hz to -145 dBm/Hz in 0.25 dBm increments

Specifications are subject to change without notice. Made in USA

Ordering Options

The modular design of Telebyte’s products allows the 458-LM-E1-30-04+ to be combined with other line modules for a wide variety of test configurations.

Ordering Options
458-LM-E1-30-04+ Multi-Standard Local Loop Simulator Local Loop without noise
458-LM-E1-30-04+-AWGN2 Multi-Standard Local Loop Simulator
with (2) AWGN Generator Modules		 Local Loop with independent noise
sources at the CO and CPE end