Model 700 Series

Model 700 Series

Model 700 Series products are multi-standard/multi-channel local loop simulators and are the ideal solution for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing. The highly accurate models in this series are offered in several different configurations, including combinations of wire types, in 8, 12 or 16-channels.

The Model 700 Series products are multi-standard/multi-channel local loop simulators and are the ideal solution for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing. The highly accurate models in this series are offered in several different configurations, including combinations of wire types, in 8, 12 or 16-channels.

The 700 Series models offer fine granularity and long line lengths. They may be ordered with or without the ability to inject variable AWGN on the CO and/or CPE side of each loop.

Main Features
  • Multiple wire types to choose from: 26 AWG PIC as specified in ANSI T1.417 (0 to 24,000 ft/25-ft steps) 0.4mm PE as specified in ETSI TS 101 388 (0 to 9,000 m/10-m steps) TP100 as specified in ETSI TS 101 270-1 & G.992.5 Annex M (0 to 9,000 m/10-m steps)
  • Bandwidth DC to 30 MHz
  • Solution for ADSL, ADSL2, ADSL2+, & VDSL2 chip/ modem/ DSLAM testing
  • Highly accurate, lab grade unit with fine increments for a variety of applications such as Bonding and Rate/Reach
  • Order with/without variable AWGN for CO and/or CPE side of each loop

 

Product Overview

The Model 700 Series products are multi-standard/multi-channel local loop simulators and are the ideal solution for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing. The highly accurate models in this series are offered in several different configurations, including combinations of wire types, in 8, 12 or 16-channels.

The 700 Series models offer fine granularity and long line lengths. They may be ordered with or without the ability to inject variable AWGN on the CO and/or CPE side of each loop.

Product Specifications

Model 458-LM-E1-30-TP100 Multi-Standard Local Loop Simulator with Optional AWGN Generator
Simulation Accurately simulates attenuation and impedance
Full bidirectional operation at all specified frequencies
Wire Types Available
26 AWG PIC as specified in ANSI T1.417
0.4mm PE as specified in ETSI TS 101 388
TP100 as specified in ETSI TS 101 270-1 & G.992.5 Annex M
Bandwidth DC to 30 MHz.
Attenuation Accuracy
(when source and load
impedances are 100 ohms)		 MAE < 1 dB 20 kHz to 30 MHz
Maximum Attenuation > 90 dB
Impedance Accuracy Typically +/- 10% 20 kHz to 30 MHz
Maximum Voltage Tip ?Ring 200 V
Maximum Current 130 mA
Connectors Front: 16, 24 or 32 RJ-45’s (2 for each loop, for CO/CPE connection)
Back: RS-232: DB9 female (DCE); GPIB:IEEE488 24-pin connector. Ethernet: RJ-45
Optional White Noise (AWGN) -90 dBm/Hz to -145 dBm/Hz in 0.25-dBm increments
Controls Keypad for setting loop lengths and IEEE-488 address, RS-232, or Ethernet communication parameters.
Indicators Backlit LCD display of line length and set up parameters.
Power 88 to 264 VAC, 50 or 60 Hz.
Size [7U] 19 in W x 22 in D x 12.22 in H
(482.6 mm W x 558.8 mm D x 310.4 mm H).
Environmental Operating: +32 F to +122 F (0 to +50 degrees C)
Storage: 0 to 95% relative humidity (non-condensing).

Specifications are subject to change without notice. Made in USA

Ordering Options without AWGN Options

Model Number Simulation
  #Chs Wire Type Line Length/Increment #Chs Wire Type Line Length/Increment
700-8-26 8 26AWG 0 to 24,000 ft/25-ft – –  
700-12-26 12 26AWG 0 to 24,000 ft/25-ft – –  
700-16-26 16 26AWG 0 to 24,000 ft/25-ft – –  
700-8-04 8 0.4mm PE 0 to 9,000 m/10-m – –  
700-12-04 12 0.4mm PE 0 to 9,000 m/10-m – –  
700-16-04 16 0.4mm PE 0 to 9,000 m/10-m – –  
700-8-TP100 8 TP100* 0 to 9,000 m/10-m – –  
700-12-TP100 12 TP100* 0 to 9,000 m/10-m – –  
700-16-TP100 16 TP100* 0 to 9,000 m/10-m – –  
700-4-26-4-04 4 26AWG 0 to 24,000 ft/25-ft 4 0.4mm PE 0 to 9,000 m/10-m
700-6-26-6-04 6 26AWG 0 to 24,000 ft/25-ft 6 0.4mm PE 0 to 9,000 m/10-m
700-8-26-8-04 8 26AWG 0 to 24,000 ft/25-ft 8 0.4mm PE 0 to 9,000 m/10-m
700-4-04-4-TP100 4 0.4mm PE 0 to 9,000 m/10-m 4 TP100* 0 to 9,000 m/10-m
700-6-04-6-TP100 6 0.4mm PE 0 to 9,000 m/10-m 6 TP100* 0 to 9,000 m/10-m
700-8-04-8-TP100 8 0.4mm PE 0 to 9,000 m/10-m 8 TP100* 0 to 9,000 m/10-m

 

Ordering Options with AWGN Option (Variable AWGN on CO and CPE Side of ALL Loops)

Model Number Simulation
  #Chs Wire Type Line Length/Increment #Chs Wire Type Line Length/Increment
700N-8-26 8 26AWG 0 to 24,000 ft/25-ft – –  
700N-12-26 12 26AWG 0 to 24,000 ft/25-ft – –  
700N-16-26 16 26AWG 0 to 24,000 ft/25-ft – –  
700N-8-04 8 0.4mm PE 0 to 9,000 m/10-m – –  
700N-12-04 12 0.4mm PE 0 to 9,000 m/10-m – –  
700N-16-04 16 0.4mm PE 0 to 9,000 m/10-m – –  
700N-8-TP100 8 TP100* 0 to 9,000 m/10-m – –  
700N-12-TP100 12 TP100* 0 to 9,000 m/10-m – –  
700N-16-TP100 16 TP100* 0 to 9,000 m/10-m – –  
700N-4-26-4-04 4 26AWG 0 to 24,000 ft/25-ft 4 0.4mm PE 0 to 9,000 m/10-m
700N-6-26-6-04 6 26AWG 0 to 24,000 ft/25-ft 6 0.4mm PE 0 to 9,000 m/10-m
700N-8-26-8-04 8 26AWG 0 to 24,000 ft/25-ft 8 0.4mm PE 0 to 9,000 m/10-m
700N-4-04-4-TP100 4 0.4mm PE 0 to 9,000 m/10-m 4 TP100* 0 to 9,000 m/10-m
700N-6-04-6-TP100 6 0.4mm PE 0 to 9,000 m/10-m 6 TP100* 0 to 9,000 m/10-m
700N-8-04-8-TP100 8 0.4mm PE 0 to 9,000 m/10-m 8 TP100* 0 to 9,000 m/10-m

Note: TP100 wire is the same diameter as 0.5mm wire