·New Friendly GUI Design
·SOC Support
·4.3” Color LCD Touch Screen
·Portable Charger Support
TECHNICAL SPECIFICATIONS
Model A3
Alignment Method Active Clad Alignment (4 Motors)
Number of Fiber Single
Applicable Fibers SM (ITU-T G.652&G.657) / MM (ITU-T G.651) / DS (ITU-T G 653) / NZDS (ITU-T G.655)
Coating / Cladding Diameter Coating Diameter : 100 ~ 3000μm, Cladding Diameter : 80~150μm
Cleaved Length 5 ~ 16mm
Typical Splice Loss SM: 0.03dB / MM: 0.01dB / DS: 0.05dB / NZDS: 0.05dB / G.657: 0.03dB
(Measured by fusion splicing compensating cutback according to ITU-T standard)
Return Loss >> 60dB
Estimated Splice Loss Available
Splice Time Quick mode 7s
Splice Mode Preset 6 kinds of splicing mode, Max 320 mode available
Heating Sleeve 20 ~ 60mm
Heating Time 15s (45mm, slim 60mm), 20s (60mm)
Heating Mode Max 32modes
Pull Test 1.96 ~ 2.25N
Dimension 197W x 137D x 87H mm (including rubber bumper) / 187W x 128D x 82H mm (excluding rubber bumper)
Weight 1.206kg (with battery) / 0.997kg (without battery)
White LED 2 White LEDs
Monitor 4.3″ Color LCD display, Full touch screen
Fiber View X, Y, X/Y
Magnification 120 ~ 240x
Results Storage 10,000 Splice data / 10,000 Splice image
Power Supply AC Input 100 ~ 240V, DC Input 9 ~ 14V
Terminal USB Type C
Battery Capacity 3000mAh Battery Capacity, Typical 150 cycles (Splice+Heat), Power save mode 200 cycles (Splice+Heat)
Electrode Life 5500 arcs discharges
