TX340s Advanced Multi-Service Test Option

• Flexible all-in-one multi-service test platform supporting 64 kbps to 16 Gbps, with optional combination of 100G and OTDR modules.
• Designed for Transport, Core, Metro, SAN, Backhaul, and Fronthaul applications.
• Supports up to four independent test port groups with simultaneous measurements.
• Includes a test card summary view for monitoring up to four active tests, with easy switching between test applications and management functions.

OTN / SDH / SONET / PDH / DSn 

• Advanced OTN, SDH/SONET, and PDH/DSn payload mapping and multiplexing including EoOTN (ODU2e, ODU0, ODUflex)
• Overhead monitoring and byte decoding
• Protection switching and service disruption time measurement
• Round trip delay across all interfaces and payload mappings
• Tandem connection monitoring support
• Jitter and wander analysis (E1, E3, DS1, DS3, STM-1o, OC-3)
• Pulse mask analysis for E1, E3, DS1, DS3 rates

Fibre Channel 

• SAN testing up to 16G
• BERT and throughput testing
• RFC2544 testing (throughput, latency, frame loss, back-to-back)
• Layer 1 and Layer 2 loopback support

CPRI Testing 

• CPRI support with unframed, Layer 1 framed, and Layer 2 testing (REC/BBU and RE/RRH emulation)
• OBSAI unframed testing support
• BER testing with PRBS stress patterns
• Latency measurement support

Ethernet 

• RFC2544 testing (throughput, latency, frame loss, back-to-back)
• V-SAM test suite compliant with ITU-T Y.1564
• OAM support (IEEE 802.3ah, Y.1731, IEEE 802.1ag, MPLS-TP)
• VLAN stacking (Q-in-Q), MPLS, MPLS-TP, PBB support
• RFC6349 V-PERF TCP test suite
• Layer 2 control protocol transparency testing
• In-service monitoring with frame capture and on-screen decode
• One-way latency measurement with optional GNSS receiver
• SyncE and ITU-T G.8261 support for synchronised packet networks
• Master/Slave clock emulation
• Wander measurement and MTIE/TDEV analysis
• ESMC SSM generation, monitoring, and decoding
• VoIP and IPTV testing support

IEEE C37.94™

• Power and utility teleprotection network testing
• BERT, SDT/APS, RTD, and transparency testing
• Passive bidirectional monitoring and intrusive pass-through modes
• GNSS-assisted one-way delay measurements

• Flexible wavelength and bit rate support using industry-standard pluggable optics
• OTN support: OTU2, OTU1, OTU2e, OTU1e
• SDH support: STM-64, STM-16, STM-4, STM-1, STM-0
• SONET support: OC-192, OC-48, OC-12, OC-3, OC-1, STS-3, STS-1
• PDH/DSn support: DS1, DS3, E1, E2, E3, E4
• EoOTN testing with OTU1e, OTU2e, ODU0, and ODUflex including bulk and Ethernet payloads
• Supports coupled or independent Tx/Rx configurations
• Tandem Connection Monitoring (TCM) support
• Service Disruption Testing (SDT) and APS support
• Round-trip delay measurement across all interfaces and payload mappings
• Jitter and Wander analysis (E1, E3, DS1, DS3, STM-1o, OC-3) 

Test Interfaces (per module) 

• Port –  2 SFP+/SFP
  Technology – Ethernet / Fibre Channel / OTN / SDH / SONET / CPRI / IEEE C37.94
  Rates – 10GBASE-X, 1000BASE-X, 100BASE-FX, 10GBase-T, 5GBase-T, 2.5GBase-T; 16G–1G FC; OTU2e/OTU1e/OTU2/OTU1; STM64/16/4/1/0; OC192/48/12/3/1; 12.168G–614.4M; 64k–768k

• Port – 2 RJ45
  Technology –Ethernet
  Rates – 1000/100/10Base-T

• Port – 3 BNC2
  Technology – SDH/SONET / PDH/DSn
  Rates – STM1/0, STS3/1; E4, E3, E2, E1, T3

• Port – 1 RJ481
  Technology –PDH/DSn
  Rates – E1, T1, 64K Codirectional

• Port – 2 SMA
  Technology – Clock (Ext.)
  Rates – 1PPS, 1.544/2.048/10 MHz, 2.048 Mbps, 1.544 Mbps

• 1Balanced RJ48 or Bantam connector support
• 2Rx1, Tx1, and Rx2 monitoring configuration support

Data Sheet – Download

Multi Service Test Module Manual HR – Download