eds10gb

EDS-10G WAN Latency Emulator

EDS-10G  WAN Latency Emulator ,The EDS-10/40G, from East Coast Datacom,  is a WAN Emulator allowing users to test/stage critical network equipment by  altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000,  10GbE and 40GbE Ethernet. Excellent for network impairment testing.

The EDS-10/40G is a WAN Emulator allowing users to test/stage critical network equipment by altering bandwidth, latency, packet loss, congestion and other important link impairments over 10/100/1000, 10GbE and 40GbE Ethernet. The product is an excellent choice for network impairment testing.

The EDS-10/40G utilizes the latest hardware and software design allowing line rate performance. The unit is a must have test tool for product development / demonstrations, network validation, VoIP benchmark testing, video / IPTV simulation and transaction performance.

The INTEL© XEON hardware based architecture is coupled with custom software presenting an easy to use interface. The user has no cumbersome software or confusing licenses to deal with for secure operation. The unit operates from a command line interface or web browser. The unit supports multiple users with admin set priviledges for eash users access.

The EDS-10/40G can act as a bridge or a router in the users network. The user configures the unit via a standard web browser. All commands and settings are displayed prominently. Simply set the band width, delay and any traffic congestion or loss if required. The unit also supports a filtering method of IP Packets and scripting support for automated testing. The user is presented with the results in real time and in a graph.

By using the EDS-10/40G in place of or in series with a real data link (WAN) a wide variety of error conditions can be introduced under controlled and testable conditions. The unit is an excellent choice for validating and evaluating new products and technologies. The software has been optimized for extreme accuracy and repeatable results.
The EDS-10/40G is housed in a sturdy 3U high metal enclosure which can be rack mounted. It is powered by an integrated 90-240V 50/60Hz power supply. The EDS-10/40G has a three year warranty and a 24 hour turnaround on warranty repairs.

 

eds-10g_application_diagram

INTEL XEON Hardware Provides High Throughput Performance and delay accuracy of +/- 50 μs,

  • Interface – 10/100/1000, 10GbE, 40GbE Copper or Fiber
  • Supports multiple links and filtering of packets
  • Validate and Optimize your Network before Deployment to avoid Costly Application issues
  • Easy to use – Command Line Interface with Scripting Support or GUI Interface
  • GUI Supports Multiple Users with Admin Privileges assigned
  • Bandwidth – 300bps – 40GbE in 1bps increments
  • Delay – 0 ms to 8 sec. in 1ms increments, settings for Constant, Uniform and Normal
  • Other Features – Real time traffic graph and Network Statistics, output reports
  • Approvals – UL, CSA, CE, FCC and RoHS
  • 2U Sturdy Rack Mount Enclosure, 90-240VAC

Application WAN Emulator for connection of 10GbE or 10/40GbE devices emulating bandwidth, latency, packet loss and congestion on two independent LAN channels
Delay Type  Fixed delays or Randon Distribution Delays
Data Rates 300bps – 40GbE in 1bps increments, bidirectional or split speed on each LAN port
Jitter Supports Jitter in 1ms Increments
Configuration Ports Two Independent 10/100/1000 Ethernet Ports
Data Interface on Delay Ports 10/100/1000, 10GbE or 40GbE Copper or Fiber
Link Rates 300bps – 40GbE in 1bps increments, bi-directional or split
speed,bps, Kbps, Mbps or Gbps
Link Throughput 28.6 MPPS throughput on 2-Ports 10GbE, 64byte Packets with delay enabled to 35Ms each port
Emulated Latency 0 ms to 10 sec. in 1ms increments, settings for constant, uniform or normal
Emulation Statistics Each link is capable of independent output statistics settings via the software scheduler
Packet Loss 0 to 100% in increments of 0.001%
Password Protection Implemented via the user LAN Management Port and
factory reset via the RS-232 Serial Port
Re-Ordering Settings for Probability & Delay Min/Max
Background Traffic 0 to 100% in increments of 0.001%, settings for LAN Utilization and Burst Size
Surge Protection Main power supply
Power Source AC Mains: 100-240VAC @ 10%, 50/60Hz, 2 AMPS, Auto Range
Environmental Operating Temperature….32º to 104º F (0º to 40º C)
Relative Humidity………….5 to 85% Non-Condensing
Altitude……………………….0 to 10,000 feet
Warranty Three Years hardware, includes software support and software feature upgrades/improvements
Dimensions Height ……. 3.50 inches (88.90 mm)
Width …….. 17.20 inches (436.88 mm)
Length ……. 14.50 inches (368.30 mm)
Software Upgrades Administered via the LAN user management Port
Regulatory Approvals Explorer, FireFox, Opera, Google / Chrome, Safari
Web Browser Compatibility Explorer, FireFox, Opera, Google / Chrome, Safari

Ordering Information Main Unit Part Number: 210000
Model: EDS-10G
Description: EDS-10G Delay Simulator Base Chassis10/100/1000 NIC CARDS
Ecdata# 226000
Desc: 4-Port 10/100/1000 Copper NIC, RJ-45Ecdata# 226001
Desc: 2-Port 10/100/1000 MM Fiber, LC Connector, NIC10GbE SFP+ NIC CARD
Ecdata# 226007
Desc: 2-Port 10GbE NIC Card, SFP+ ConnectorSFP+ Optics for ECDATA PT# 226007
Ecdata# 226004 = 10G Pluggable Optic(SR)
Ecdata# 226006 = 10G Pluggable Optic(LR)SFP+ Twin Axial Copper Cables for PT# 226007
Ecdata# 712038 = 1 Meter
Ecdata# 712039 = 3 Meter
Ecdata# 712040 = 5 Meter40G QSFP+ NIC CARD
Ecdata# 226005
Desc: 1-Port 40GbE QSFP+ NIC CardQSFP+ Pluggable Optic for PT# 226006
Ecdata# 226011 = QSFP+ SR Optic
Ecdata# 226012 = QSFP+ LR OpticQSFP+ Twin Axial Cables for PT# 226006
(1) to (1) QSFP+ copper direct attach cable
Ecdata# 712041 = 1 Meter
Ecdata# 712042 = 3 Meter
Ecdata# 712043 = 5 MeterQSFP+ Breakout Cables for PT# 226006
(1) to (4)SFP+ copper direct breakout cable
Ecdata# 712044 = 1 Meter
Ecdata# 712045 = 3 Meter
Ecdata# 712046 = 5 Meter