480-MTTplus340_01
480-MTTplus340_01
480-MTTplus340_04
480-MTTplus340_03
480-MTTplus340_02

MTTplus-340

Advanced Multi-Service Test Module

The MTTplus-340 test module offers advanced test solutions for Access, Metro and Carrier Ethernet, supporting OTN, SONET/SDH, PDH/DSn, Fibre Channel, CPRI, C37.94 and Synchronization. This compact and flexible test platform helps service providers increase efficiency and productivity. It lowers OpEx and CapEx associated with handling multiple technologies required to address today’s Access, Business, Carrier Ethernet, Transport and Core services.

  • Flexible, all-in-one multi-service test solution, from 64 kbps to 14 Gbps
  • Transport, Core, Metro, SAN, Backhaul, Fronthaul and Network Synchronization
  • Offers two fully independent test ports for simultaneous measurements
Test Interfaces (per module)
Ports Technology Rates
2 SFP+/SFP Ethernet
Fibre Channel
OTN
SDH
SONET
CPRI
IEEE® C37.94		 10GBASE-X, 1000BASE-X, 100BASE-FX, 10GBase-T, 5G Base-T, 2.5GBase-T
16G, 10G, 8G, 4G, 2G, 1G FC
OTU2e, OTU1e, OTU2, OTU1
STM64/16/4/1/0,
OC192/48/12/3/1
12.168G down to 614.4M
64k to 768k
2 RJ45 Ethernet 1000/100/10Base-T
3 BNC2 SDH/SONET
PDH/DSn		 STM1/0, STS3/1
E4, E3, E2, E1, T3
1 RJ481 PDH/DSn E1, T1, 64K Codirectional
2 SMA Clock (Ext.) 1PPS, 1.544/2.048/10 MHz,
2.048 Mbps, 1.544 Mbps

1Balanced ports available in RJ48 or Bantam connector.

2Tx1, Rx1, and Rx2. Rx2 port may be available for monitoring applications.

Ethernet

  • RFC 2544 Throughput, latency, frame loss and back to back tests
  • V-SAM test suite compliant with ITU-T Y.1564 standard
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, MPLS-TP OAM support
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB support
  • RFC 6349 V-PERF TCP/UDP test suite
  • Layer 2 Control Protocol Transparency test
  • Advanced tests: IP Sec, LACP, L2CP, NAT Traversal
  • In-service monitoring with packet capture and on-screen protocol decode
  • One way latency with optional built-in GNSS receiver
  • Fully integrated solution for synchronized packet networks
  • Supports IEEE 1588v2/PTP and SyncE/ITU-T G.8261 standards
  • Master Clock and Slave clock emulation
  • IEEE 1588v2/PTP protocol monitor & decode, and PDV analysis
  • Wander measurement and MTIE/TDEV analysis
  • Wander measurement and MTIE/TDEV analysis
  • VoIP and IPTV testing

Fibre Channel

  • Storage Area Networks (SAN) testing up to 16G FC
  • BERT, Throughput, and RFC 2544 test
  • RFC 2544: Throughput, latency, frame loss, back to back tests
  • In-service monitor, capture and protocol decode
  • Layer 1 and layer 2 loopbacks

CPRI Testing

  • Common Public Radio Interface standard (CPRI) Layer 2 tests (REC/BBU and RE/RRH emulation)
  • BER testing with PRBS stress patterns
  • Latency measurements

OTN/SDH/SONET/PDH/DSn

  • Advanced flexible OTN, SDH/SONET, PDH/DSn test payload map/mux, including EoOTN (ODU2e, ODU0 and ODUflex)
  • Overhead Monitoring and Byte decoding
  • Protection Switching and Service Disruption Time (SDT)
  • Round Trip Delay on all interfaces and payload mappings
  • Tandem Connection Monitoring
  • Jitter and Wander (E1, E3, DS1, DS3, STM-1o, OC-3)
  • Pulse Mask Analysis at E1, E3 and DS1, DS3 rates

PRODUCTS.MTTPLUS340.LIST1.HEADER5

  • Power/Utilities Teleprotection Network testing
  • BERT, SDT/APS, RTC and transparency tests
  • Passive bidirectional Monitoring and intrusive Pass-Through modes
  • GNSS-assisted One-Way-Delay measurements
  • Jitter and Wander Measurements