RXT-6200 100G Universal Module
RXT-6200 100G Universal Module
RXT1200_03
RXT 6200 module image 2
RXT 6200 module image 1
RXT-6200 100G Universal Module
RXT1200 with RXT 6200 module image 4

RXT-6200

100G Universal Module

RXT-6200 100G Universal Module Equipped with dual next generation optical transceiver ports and optional legacy test interfaces, the RXT-6200 module complements the RXT Platform, extending its testing range to 100Gbps and offering up to two independent tests.

Installation, commissioning, monitoring and maintenance tasks are simplified by its features. It has easy to use GUI, and an array of advanced features such as OTL PCS, CAUI-4 XLAUI Lane BERT, overhead monitor/control, Tandem Connection Monitoring, Service Disruption, Protocol Capture Decode, BERT, Throughput test, and much more.

Product highlights and features are listed below.

 

 

 

  • Independent Dual-Port testing, up to 2x 112G
  • CFP4 (LR4 & SR4) and QSFP28 interfaces for 100GE, OTU4 and 50GE applications
  • Supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4
  • QSFP+ for 40GE, OTU3
  • SFP28 interface for 25GE, 16G FC, 32G FC and 24G CPRI applications
  • SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e/1, STM-64/16/4/1/0, OC192/48/12/3/1, and Fibre Channel 1/2/4/8/10/16G and CPRI up to 12G applications
  • RJ45 for 10/100/1000Base-T applications
  • External clock interfaces
  • 150 ppm clock offset generation
  • Optical 100 Mbps to 100 Gbps Ethernet testing, including 25GE and 50GE
  • Electrical 10/100/1000 Mbps Ethernet testing
  • Dual-port testing capabilities
  • Optical Lane BERT and CAUI-4/XLAUI Lane BERT
  • PCS Layer Testing with Skew generation/monitoring
  • Multi-stream testing up to 32 independent streams
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, and MPLS-TP OAM support
  • RS-FEC support for SR4 and SR10 transceivers
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support
  • MAC flooding
  • RFC2544 and V-SAM (Y.1564) testing
  • IPv4 and IPv6 traffic generation
  • BERT and Throughput testing at Layer 2 and Layer 3
  • Smart Loopback mode for Layer 2 and Layer 3
  • One-Way-Delay latency measurement (GPS assisted)
  • Line rate packet capture with Wireshark™ decode
  • Error and Alarm Injection
  • Common Public Radio Interface standard (CPRI) link performance verification
  • Supports all Rate Options up to CPRI 10 (from 614.4 Mbps to 24.33 Gbps) per CPRI Specification v7.0
  • Layer 2 Framed BER testing with PRBS stress patterns
  • REC/BBU (master) and RE/RRH (slave) emulation
  • Latency measurements
  • Dual-port operation and bi-directional monitoring mode
  • Storage Area Networks (SAN) testing for 1G, 2G, 4G, 8G, 10G, 16G and 32G interfaces
  • BERT and Throughput test
  • RFC2544: Throughput, latency, frame loss, back to back tests Layer 1 and layer 2 loopbacks
OTN Testing
  • OTN testing for OTU1, OTU2, OTU1e, OTU2e, OTU3 and OTU4
  • Complete multi-stage Mapping/Multiplexing
  • Advanced multi-step Map/Mux with SDH/PDH/DSn test payloads*
  • Ethernet over OTN (EoOTN)
  • ODUflex into ODU2, ODU3 and ODU4 with Bulk payload
  • Service Disruption Time (SDT)
  • Tandem Connection Monitoring
  • Overhead monitoring and generation
  • Terminate, Payload Through and Line Through test modes
  • Per-lane optical power and frequency measurements
  • External clock reference interface
  • Histogram Analysis
PDH/T-Carrier Testing

The test set provides optional legacy SDH/PDH and DSn test interface capabilities and sub-rates from 155M (STS3/STM1), 55M, (STS1/STM0), 140 Mbps (E4), 34 Mbps (E3), 2 Mbps, 45 Mbps (DS3), 1.5 Mbps (DS1), and G.703 64k co-directional.

 

SDH Testing
  • Available as Line Rate or mapped into OTN payloads
  • STM-0 to STM-64 and STS-1/OC-1 to OC-192
  • Advanced multi-step Map/Mux with PDH/DSn test payloads
  • Test payload multiplexing down to VC11/VT1.5 and internally generated PDH/DSn tributaries