TX300s-100G (T1 to 100G)
TX300s-100G (T1 to 100G)
1024-TX300s100GOption_02

TX300s-100G (T1 to 100G)

All-in-one Optical and Service Test Platform

TX300s-100G (T1 to 100G), with the latest technology in pluggable physical interfaces, is a perfect complement to the TX300s Platform, extending its testing range to 100 Gbps. Compatibility with the companion TX320sm option offers a complete 64k to 100G test solution in a compact portable package.

Installation, commissioning, monitoring and maintenance of Ethernet, OTN and SDH networks is simplified as well as unit has advanced features such as OTL/PCS, CAUI-4/XLAUI Lane BERT, Service Disruption, overhead monitor/control, Tandem Connection Monitoring, Protocol Capture/Decode, BERT, Throughput test, and much more.

 

TX300s replaced with TX340s

  • Available with CFP4 or QSFP28 for 100GE and OTU4 applications
  • Supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4 (QSFP28)
  • QSFP+ for 40GE, OTU3
  • External clock interface
  • 150 ppm clock offset generation
  • Soft LED indicators
  • 40 Gbps and 100 Gbps Ethernet testing
  • Supports IEEE 802.3bj Clause 91 RS-FEC
  • Optical Lane BERT and CAUI-4/XLAUI Lane BERT
  • PCS Layer Testing with Skew generation/monitoring
  • Multi-stream testing up to 32 independent streams
  • IEEE 802.3ah, ITU-T Y.1731, IEEE 802.1ag, MPLS-TP OAM support
  • Q in Q (VLAN stacking), MPLS, MPLS-TP, PBB, EoE support
  • MAC flooding
  • RFC2544 and V-SAM (Y.1564) testing
  • Service Disruption Measurements
  • IPv4 and IPv6 traffic generation
  • BERT and Throughput testing at Layer 2 and Layer 3
  • Smart Loopback mode for Layer 2 and Layer 3
  • One-Way-Delay latency measurement (GPS assisted)
  • Line rate packet capture with Wireshark™ decode
  • Error and Alarm Injection
  • OTN testing for OTU3 and OTU4
  • Complete multi-stage Mapping/Multiplexing
  • Ethernet over OTN
  • Service Disruption measurements
  • Tandem Connection Monitoring
  • Overhead monitoring and byte decoding
  • Terminate, Payload Through and Line Through test modes
  • Per-lane optical power and frequency measurements
  • External clock reference interface
  • Histogram Analysis
  • Optical lane BERT
  • PCS layer testing with skew generation/monitoring
  • Transmit and receive optical power measurement
  • Module status display