UCTT 8091 - Sage
UCTT 8091 - Sage
cutt notes

UCTT 8091 – Sage

UCTT 8091 – Sage Base StationTest Instrument

Powerful Next Generation Base Station Tester

The new SAGE Universal Cellular Test Tool (UCTT) 8901 is the industry’s most advanced and versatile portable test instrument for base station deployment and troubleshooting. The UCTT combines a laboratory quality spectrum analyzer, an innovative antenna tester and fully integrated backhaul test capabilities for E1/T1, Ethernet (10/100/1000), and OC-X. In addition, the UCTT provides in-depth demodulation and monitoring capabilities for all 2G, 3G and 4G technologies.

“The UCTT represents a new generation of multi-functional test tools to serve the emerging 3G and 4G wireless markets. Its powerful software radio technology enables operators to more accurately assess wireless service performance and more quickly isolate problems with transmission, modulation quality and synchronization”.

With its intuitive hybrid graphical user interface combining both hard keys and soft keys, the UCTT provides unparalleled ease of use for navigation and test control. And the UCTT’s all weather rugged design will help operators deploy and troubleshoot their networks under the worst weather conditions.

  • Next Generation Test Solution for 3G and 4G wireless networks
  • Most versatile one-box test solution for BTS, RN,or Node B
  • Most durable, withstands harsh environments per MIL-STD-810
  • Measurement performance rivals laboratory instruments

 

Base Station Test Technologies

  • AMPS
  • CDMA IS-95
  • CDMA 2000
  • GSM
  • EDGE
  • GPRS
  • W-CDMA/HSDPA
  • WiMAX
  • LTE

 

 

APPLICATIONS and CAPABILITIES
  • 20 MHz Analysis Bandwidth FFT Spectrum Analyzer
  • BTS Transmitter Performance
  • BTS Receiver Performance
  • Antenna Performance
  • Distance to Fault
  • T1/E1 BERT Tester
  • Modulation Analyzer
  • Complex Wave Generator
  • Integrated Precision Power Meter
  • Performs all standard BTS and OTA measurements
SPECTRUM ANALYZER
• Range: 698 MHz to 2.7 GHz
• Trace Update Time: Min 50 ms, Max 150 ms
• Frequency Span: 10 KHz to 600 MHz
• Resolution Bandwidth: 100 Hz to 5 MHz
• Sweep Trigger: Free run, Single, External
• Sample Averaging: 1 to 100
• Windowing: Uniform, Kaiser, Hanning, Hamming, Gaus
• Reference Level Range: -100 dBm to +60 dBm (Ref Level = 0 dB)
• Measurement Range: -144 dBm to + 30 dBm
• Input Attenuation: 0 to 55 dB automatically selected
• Preamp: +20 dB (Manual)
• Absolute Amplitude Accuracy: +/- 1 dB
• DANL – 143 dBm 698 to 1 GHz
• DANL – 143 dBm 1.1 to 2.2 GHz
• DANL – 141 dBm 2.2 to 2.7 GHz
• Simultaneous Dynamic Range: 90 dB
• SSB Phase Noise: -90 dBc/Hz max at 30 kHz offset
• Spurious Responses: Residual (input terminated in 50 ohms):
< -130 dBmSignal Related (2-tones, -26 dBm, 100 kHz spacing
(Preamp OFF): > 70 dBc
• Displayed Average Noise Level: -144 dBm (DANL in 100 Hz
RBW, preamp on)
• RF Input VSWR: 1.8:1 typical
• Display Range: -200 dBm to + 60 dBm 1 to 15 dB/div in 1 dB
steps. Ten divisions displayed
CABLE AND ANTENNA ANALYZER
• Frequency Range: 698 MHz to 2.7 GHz
• Frequency Resolution: 125 kHz
• Data Points: 1024
• Interference Immunity: On-Channel: +20 dBm On-Frequency:
0 dBm (RF Out) +30 dBc RF in
• Insertion Loss: Range: > 100 dB Accuracy: +/- 1 dB
• Distance-to-Fault: Range:
200 M Data Points: 1024 Accuracy:Typical +/- 15 cm
Measurement Speed: 200 ms
• Return Loss: Range: 0 to 100 dB Resolution: 0.01 dB
• VSWR: Range: 1 to 3.5 Resolution: 0.01 dB
POWER METER
• Frequency Range: 698 MHz to 2.7 GHz
• Display Range: -80 dBm to +80 dBm
• Measurement Range: -60 dBm to +30 dBm Offset Range: 0 to
+60 dB
• Accuracy: +/- 1 dB
• VSWR: < 1.8:1 typical
• Maximum Power: +30 dBm (1W) without external attenuator
 INTERFERENCE ANALYZER
• Strength of the Interferer: Locate the Interferer
• RSSI: Collect data up to 100 hours
• Spectrogram: Collect data upto 100 hours
CHANNEL SCANNER/ADJACENT CHANNEL POWER
• Frequency Range: 698 MHz to 2.7 GHz
• Measurement Range: +30 dBm to -144 dBm
• Channel Power Accuracy: ±1.0 dB
• Adjacent Channel Power Accuracy: ±0.50 • Occupied Bandwidth Accuracy: ±100 kHz
• Residual Adjacent Channel
• Leakage Ratio (ACLR)
-55 dB typical at 5 MHz offset
-60 dB typical at 10 MHz offset
• Leakage Ratio (ACLR):
-55 dB typical at 5 MHz offset
-60 dB typical at 10 MHz offset
• ACLR Accuracy (Single Channel Active):
-45 dB at 5 MHz offset
±0.5 dB for ACLR -50 dB at 10 MHz offset
• Frequency Error: ±1 Hz + Time Base Error
GSM/GPRS/EDGE RF MEASUREMENTS GSMK Modulation Quality
• RMS Phase Measurement Accuracy: ±1 deg
• Peak Phase Measurement Accuracy: ±1 deg
• Residual Error (GSMK): 1 deg
• Frequency Offset Accuracy: ±1 Hz
• TSC: 0-7
• SBC: 0-2
• Burst Type Capture: Frequency Correction, Dummy, Normal, Synchronization, Access 8PSK Modulation Quality
• (EVM) Measurement Accuracy: ±1.5%
• Residual Error (8PSK): 2.5%
• Frequency Offset Accuracy: ±1 Hz
GSM/EDGE MODULATION ANALYZER
• IQ Diagram
• Burst Type Decode
• Frame Number Decode
• BSIC Number Decode
GSM/EDGE BURST ANALYZER
TimeSlot Mask per 3GPP-TS-05.05
GSM/EDGE RF MASK ANALYZER
Support for all Mask Templates per Annex B
• Reference Power Level: -90 dBm to +58 dBm
GSM ABIS MONITOR
• Codec Type: GSM, AMR, ACELP
• TRAU FRAME Decode
• LAPD Decode
WCDMA/HSDPA RF MEASUREMENTS
• Frequency Ranges: 698 MHz to 2.7 GHz
• RF Channel Power: ±0.5 dB typical
• Occupied Bandwidth Accuracy: ±100 kHz
• Transmit Level: 0 dB, -7.5 dB, and -15 dB
• Clock Sources: External Bits clock
• Internal: 1.544 Mb/s ±5 ppm / 2.048 Mb/s / ±5 ppm
• Pulse Shapes: Conform to ANSI T1.403 and ITU G.703
• Pattern Generation and Detection:
• PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and non-inverted QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24, All ones, All zeros, T1-Daly, User defined (128 bits)
• Circuit Status Reports: Carrier present, Frame ID and Sync., Pattern ID and Sync.
• Alarm Detection: AIS, RAI
• Error Detection: Frame Bits, Bit, BER, BPV, CRC, Error Sec
• Error Insertion: Bit, BPV, Framing Bits, RAI, AIS
• Loopback Modes: Self loop, CSU, NIU, User defined, In-band or Data Link
• Level Measurements: Vp-p (±5%), can also display in dBdsx
• Data Log: Continuous, up to 48 hrs
• T1 Frequency Measurement: ±5 ppm
• DS0 Channel Access Testing: Tone Generator Frequency: 100 Hz to 3000 Hz
• Level: -30 to 0 dBm, with 1 dB steps
• VF Measurement: Frequency: 100 Hz to 3000 Hz, ±1 Hz Level: -40.0 to +3.0 dBm, ±0.2 dBm
• Audio Monitor: Manually select channel 1 to 24
• ITU G.826 Analysis & G.821 Error Reporting: Errored seconds, error free seconds, severely
errored seconds, unavailable seconds, available seconds, degraded minutes
WCDMA DEMODULATION AND WCDMA/HSDPA
Demodulator
• EVM Accuracy: (3GPP Test Model 4) ±2.5%; EVM 25% (3GPP Test Model 5) ±2.5%; EVM 20%
• EVM Accuracy2: ±2.5% for 6 EVM 20%
• Residual EVM: 2.5% typical
• Code Domain Power: ±0.5 dB for code channel power >-25 dB, 16, 32, 64 DCPH (test model 1) 16, 32 DCPH (test model 2, 3)
• CPICH (dBm) Accuracy: ±0.5 dB typical
• Scrambling Code: 3 seconds T1/E1 Analyzer, Fractional T1/E1 and
Sub-channels
• Line Coding: AMI, B8ZS
• Framing Modes: D4 (Superframe), ESF (Extended Superframe)
• Connection Configurations: Terminate (100 O) Bridge (100K O) Monitor (100 O) Drop&Insert (100 O)
• Receiver Sensitivity: Terminate +6 dB to -36 dB Bridge +6 dB to -36 dB Monitor 20 dB flat gain Drop&Insert +6 dB to -36 dB
ETHERNET ANALYZER
• Physical Layer 10/100/1000 Base T
• RFC 2544 Testing (Throughput, Latency & Packet Loss Rate)
Cable Testing (TDR)
ARBITRARY RF SIGNAL GENERATOR
• Frequency Range: 698 MHz to 2.7 GHz
• Power Output: 0 dBm, ± 5%
• Phase Noise: 85 dBc
• Waveforms: AMPS, TDMA, GSM, CDMA, WDCMA
GENERAL SPECIFICATIONS
• Uplink/Downlink Channel Plans:
AMPS, 850CDMA, 1900CDMA, GSM850, GSM900, GSM1800, GSM1900, UMTS1700, UMT2100
• Maximum Continuous Input: +30 dBm
• Maximum Continuous Input without Damage: +33 dBm
• Turning Resolution: 1 Hz
• Frequency Accuracy: Internal Time Base Accuracy: ±0.1 ppm after warm up. Internal Time Base Aging: ±0.1 ppm/year GPS Lock: +/-
12.5 ppb (25° C)
• Frequency and Time Reference: Internal: Ovenized Crystal Reference, GPS derived 1 pps External: One Pulse Per Second, Even Second Clock Multiples of 1 MHz to 20 MHz
Multiples of 1.2288 MHz to 19.6608 MHz 2.048 MHz
Interfaces
RF Out Port: Type-N F (50O)
RF In Port: Type-N F (50O)
Ext Ref/Trig: BNC
Even Sec: BNC
GPS Antenna: SMB
Dual E1/T1: RJ-45
Dual 10/100/1000: RJ-45
10/100 Base T Ethernet: RJ-45
Ext DC Input: MIL-57D Circular
SVGA: MIL-STD Circular (Acc)
Audio: MIL-STD Circular (Acc)
USB Slave: Type-A
USB Host: Type-B
• Environmental: MIL-STD-810-F
Operating: -10-C to 55-C, humidity 85%
Storage: -51-C to 71° C
Altitude: 5000
• Safety: EN 61010-1, portable equipment
• Electromagnetic Compatibility: CE
• Size: 300 x 216 x 114 mm (13.0 x 8.5 x 4.5 in.)
• Weight: 5.4 kg/12.0 lbs (loaded – one bat.) 6.1 kg/13.5 lbs (loaded – two bat.)